Industrial Separation Solutions
Application
"I am very interested in using your curtain inside a 15’x50’ metal building to separate the workshop from the storage area. I plan to close the curtain and air condition the shop area during the summer months. How difficult is the installation?"
Solution
Insulated industrial drapes would be great for isolating a workshop from a storage space in a metal building. These curtains are meant to be a strong barrier that keeps the temperature in your workshop area under control and stops cool air from leaking into the storage room. In this situation, the insulated curtains especially help since they provide thermal resistance, which is necessary to keep the shop space cool in the summer while air conditioning is running.
The curtains require a quite simple installation technique. Mounting the curtains on a ceiling track system lets them slide open or closed as needed. The track system is made for simple attachment to the structure of your metal building; most installations may be finished with simple tools. Depending from your configuration, installation could take several hours, but the outcome will be a practical and effective divider improving your workspace. Furthermore, they are a sensible long-term fix for your building since they are low-maintenance and robust.
Application
We are looking for an industrial curtain to run the length of our shop (60 feet) to divide the area. We need it to be 12 feet high, with a two-tone gray design and a red bottom, and no windows. As long as there is a small doorway to move between sides, we don’t need it to slide. The track systems were a bit confusing on your website, so I could use some help figuring out what to order. Thanks.
Solution
Custom-colored vinyl curtains would exactly fit your needs for separating your shop with a 60-foot long, 12-foot high industrial curtain. Designed in the two-tone gray with a red bottom as advised, this kind of curtain guarantees not only good performance but also fit with your aesthetic tastes. For retaining solitude or concentration in particular work zones, the lack of windows will offer total visual separation between the two regions.
The curtain can be installed with a built-in strip door or a strategically placed zipper door if you want a little doorway for access but do not require the curtain to slide. This eliminates the requirement for a complete sliding mechanism and permits simple passage between the two zones. About the track system, the curtain can be hung straight to the wall or ceiling with fixed mounting brackets since sliding is not required. This provides a simple and efficient way to divide your area by removing the complex sliding track system and streamlining installation.
Application
Can curtain wall spray booths be combined with an extraction fan and duct for fume removal?
Solution
We can incorporate cutouts on the curtains and can place it anywhere on the curtain. We also carry a 4'x4' or 2'x4' size Filter Panel. It allows negative pressure so the curtains don't get sucked in if there's an exhaust.
Application
I have 3 questions regarding the garage curtains. Can Strip Curtains be sewn onto vinyl curtains?
1. My garage has a 6 " difference in floor to ceiling height from front to back. Do you make the curtains with a similar height difference?
2. It appears that the roller track is just under 1.5" wide. How would I attach a ceiling mounted track along a 1.5" rafter that is running in the same direction as the track since the mounting hardware appears wider than 1.5"?
3. Can a strip curtain be incorporated into a curtain to form a type of door? If so, what size can it be?
Solution
Sewn-in Strip Curtains are available be sewn-in at least 1' from the left or right edge of a curtain. Due to its weight, we can only do 3' wide x 7' high or 6' wide x 7'h. If you need something bigger than this for entrance, we have a frame where you can hang Strip Curtains with sizes available up to 12'. More entry or exit point options are available on this Page.
Application
We are interested in seeing what you have for curtain material that is HACCP food grade material for our shrink tunnel. The high temp 210 degrees F. Looking for solid material.
Solution
We offer a white silicone coated fiberglass cloth that confirms to FDA requirements in the Code of Federal Regulations, title 21 part 177.2600. This is a woven fiberglass cloth that has been coated on both sides with a white silicone that confirms to the FDA requirements. This can go up to 500F and can be cut to strips so it can go on the entrance of a conveyor of some sort. This is a special-order item and not available on the website. You can reach us at (989) 414-1209.
Application
Hi im looking to divide a few work zones. the areas are about 8' in width and 8' in height. Im curious if there's a few different ways to do this ie mobile base and or just overhead curtain track.
Solution
We have portable dividers that are versatile solutions designed to create temporary or movable partitions in various settings. These dividers offer flexibility and ease of use, and are ideal for environments where space needs to be reconfigured frequently. They are available in specific sizes and can be used with clear or opaque curtain materials.
Application
I'm looking into building an enclosure around some equipment for steam containment. The process is fairly sensitive and we would require stainless steel track/components. Do you make the track and angles out of stainless as well? Or is just galvanized?
Solution
We have stainless-steel curtain track that are designed to work seamlessly with our USDA-approved divider curtains. The tracks have smooth surfaces that prevent the buildup of dust, debris, or contaminants, making them easy to sanitize. It can have a curved track, making it continuous even through a corner. You can find more information here: https://www.curtain-and-divider.com/wash-down-curtains/usda-wash-down-curtains/
Application
We would like to consider an internal curtain to secure one area from another. Can the sides of the curtains be equipped with some sort of vertical bars that would accept a padlock to provide a modest amount of internal security and prevent employees or visitors from cross that barrier?
Solution
Vinyl curtains can be flexible as how you need them to be. You can put any fastener you may need to put on the edges for mounting. We can also put open hems so you can insert a chain or pipe and lock them in place. On the other hand, it may not be the easiest but people can cut the vinyl curtain with a pair of scissors or a cutter.
Application
We use vinyl curtains as a divider between our laser-cutting areas and our cleaning areas. The curtains quickly become very sticky, presumably from the cleaning solution fumes, as there is no liquid contact with the curtains. Chemicals used in the cleaning area include nitric acid, sulfuric acid, phosphoric acid, and hydrofluoric acid. Humidity is also very high. Do you have divider materials that would be resistant to these fumes?
Solution
We have a line of curtains that can withstand a list of chemicals. However, the list is limited to certain compounds at their specific concentrations. You can find it here. On the other hand, we have curtains that can withstand laser rays. These are available in various types. You can only go one way or another - either laser curtain or chemical splash curtain. There are high concentrated compounds that curtains can't withstand.
Application
Do you have curtains that can be used for Ice Blasting applications?
Solution
Yes, there are industrial curtains designed specifically for ice blasting applications. These curtains are built to withstand the unique challenges posed by ice blasting, such as cold temperatures, high-pressure impacts, moisture, and debris containment. Options can go from standard industrial curtains, low-temperature strip curtains, steel mesh curtains, high temperature curtains, and other specialized products. Consult with our technical experts here and expound your application.
Application
Can vents be added to a curtain?
Solution
We can incorporate cutouts on the curtains and can place it anywhere on the curtain. We also carry a 4'x4' or 2'x4'
size Filter Panel. It allows negative pressure so the curtains don't get sucked in if there's an exhaust.
Application
Can Strip Curtains be sewn onto vinyl curtains?
Solution
Sewn-in Strip Curtains are available be sewn-in atleast 1' from the left or right edge of a curtain. Due to its weight, we can only do 3' wide x 7' high or 6' wide x 7'h. If you need something bigger than this for entrance, we have a frame where you can hang Strip Curtains with sizes available up to 12'.
Application
Can the vinyl curtain withstand strong acid?
Solution
Most standard industrial curtains are made of PVC (vinyl) or similar polymers, which have varying levels of chemical resistance. We have listed chemicals and compounds that were tested with our standard vinyl curtain material (includes, but not limited to, 13oz, 18oz, 22oz, 20mil). See these pages for their reactions and compatibility. However, prolonged exposure to strong acids or highly corrosive substances can degrade the material over time.
Application
How do I choose a color among the tinted vinyl material colors that you have available for welding?
Solution
Choosing the right tinted vinyl color for welding curtains depends on the specific application, safety requirements, and desired visibility. Each color has unique properties for filtering light and UV radiation while providing a level of visibility into the welding area. Therefore, lighting is also a factor in choosing. Rule of thumb is, the darker the shade is, the better the UV protection it can provide. Please see the chart here for additional reference:
Application
Do you have food grade material with a high temperature rating?
Solution
We offer a white silicone coated fiberglass cloth that confirms to FDA requirements in the Code of Federal Regulations, title 21 part 177.2600. This is a woven fiberglass cloth that has been coated on both sides with a white silicone that confirms to the FDA requirements. This can go up to 500F and can be cut to strips so it can go on the entrance of a conveyor of some sort.This is a special order item and not available on the website. You can reach us at (989) 414-1209.
Application
Can your vinyl curtains be portable?
Solution
We have portable dividers that are versatile solutions designed to create temporary or movable partitions in various settings. These dividers offer flexibility, ease of use, and are ideal for environments where space needs to be reconfigured frequently. They are available in specific sizes and can be used with clear or opaque curtain materials.
Application
Do you have stainless-steel curtain track?
Solution
We have stainless-steel curtain track that are designed to work seamlessly with our USDA-approved divider curtains. The tracks have smooth surfaces that prevent the buildup of dust, debris, or contaminants, making them easy to sanitize. It can have a curved track, making it continuous even through a corner.
Application
Can the curtains be used to prevent people from crossing it?
Solution
Vinyl curtains can be flexible as how you need them to be. You can put any fastener you may need to put on the edges for mounting. We can also put open hems so you can insert a chain or pipe and lock them in place. On the other hand, it may not be the easiest but people can cut the vinyl curtain with a pair of scissors or a cutter.
Application
Can the laser welding curtains resist chemicals?
Solution
We have a line of curtains that can withstand a list of chemicals. However, the list is limited to certain compounds at their specific concentration. On the other hand, we have curtains that can withstand laser rays. These are available in various types. You can only go one way or another - either laser curtain or chemical splash curtain. There are high concentrated compounds that curtains can't withstand.
Application
How are the Floor Straps attached at the bottom?
Solution
Akon industrial curtains typically use floor straps to secure the curtains at the bottom, ensuring stability and preventing them from flapping or moving due to air currents or other disturbances This is Velcro sewn at the bottom of the curtain, usually spaced every 4', and paired with a D-ring. You secure the Floor Strap by looping it into the D-ring and stick it back to itself. You can check out this page for more information about Floor Straps and other accessories.
Application
Can the Floor Straps help the curtains withstand high winds?
Solution
Floor Straps can help the curtain avoid excessive movement due to regular or slight gush of wind. Their effectiveness is still dependent on the way they are attached (ie. should not be rubbing on abrasive surfaces, mounted on a horizontal floor and not on vertical wall). If more than gush of winds are expected, it is imperative to put horizontal ratchet straps. These are available from various sources online. Mesh, Webbing and other features may also be useful. Please see this page for a system that may be applicable for this application.
Application
What is the purpose of Floor Sweep?
Solution
Floor Sweep works like a Door Sweep. In general, curtains should not be touching the floor especially the sliding ones. This is to avoid the bottom edges to get damaged and wear out quicker than its standard useful life. This also means that there's a slight gap between the floor and the bottom of the curtain. Floor Sweep seals that gap, while keeping the bottom of the main curtain undamaged and remains replaceable if worn out.
Application
Do I need to deduct Floor Sweep's height from the overall height of the curtain?
Solution
No, Floor Sweep is supposed to sit on the floor. This hangs 6" below the main curtain divider to close the gap.
Application
What is the Floor Sweep made out of?
Solution
Floor Sweep is made out of the same material as the main curtain except for Insulated curtain. For Insulated Curtains, it will be made from the skin of it. For Sound Curtains, it can be still be made from the same sound barrier material.
Application
What is the Curtain Valance for?
Solution
Curtain Valance is the material piece installed above industrial or standard curtains to cover any gaps at top and protect the curtain track or hardware while providing additional functionality. Akon offers customizable valances designed to integrate with their industrial curtain systems, allowing for better sealing or lighting, and increased durability in demanding environments.
Application
How is the Curtain Valance mounted?
Solution
Depending on the material and size of the Curtain Valance, it can either be mounted using Velcro, Aluminum Angle or simply putting grommets at the top. You can check with a Technical Sales Expert for recommendation.
Application
What can Filter Panels do?
Solution
Filter Panels help allow negative air pressure, especially useful for systems where exhaust fans are incorporated. This avoids the curtains to get sucked in due to the ventilation system installed. Aside from having controlled airflow inside the enclosure, it avoids contaminants to get inside it. Since it is attached using Velcro, Filter Panels can be replaceable. Ask AKON representatives for a quote for replacement if needed here.
Application
What are the sizes available for Filter Panel?
Solution
These Filter Panels are available in 4'x4' and 2'x4' (any orientation) sizes.
Application
How are the Filter Panels attached on the curtain?
Solution
Filter panels are attached to industrial curtains using methods designed to ensure a secure fit, ease of installation, and accessibility for maintenance. They are attached using Velcro strips sewn onto both the curtain and the panel. This allows for easy removal and replacement of the panel for cleaning or filter changes.
Application
Can I weigh the curtain down?
Solution
We can add a pocket to the bottom of the curtain, allowing you to insert a lightweight chain. A recommended chain size is approximately 3/16". The lightweight chain ensures the curtain remains flexible enough to slide side to side easily. You can use a longer chain if desired, giving you the option to anchor it to the floor or loop it around a post or column to secure the curtain in place.
Application
How can I seal the edges of the curtains to adjacent walls or posts?
Solution
The most common option we offer is a Velcro feature. We can provide stick-on Velcro strips that you can attach to the curtain and the structure where you want the curtain to be sealed. Another option is a magnetic button sewn onto the vertical sides of the tarp. This is ideal for sealing the curtain against a metal beam or post.
Application
Do you have magnet strips?
Solution
We do not offer magnetic strips, but we can install magnetic buttons on our curtains, spaced approximately 3 feet apart. If necessary, we can adjust the spacing to be shorter.
Application
How far are the grommets from the edge of the curtain?
Solution
The distance from the edge of the curtain to the center of the grommets is approximately 1 inch.
Application
What material are the grommets made from?
Solution
The most common grommet we supply is made from Brass metal. However, we also offer stainless steel grommets, ideal for food production facilities or other applications requiring rust-resistant materials.
Application
If I decided to proceed with the curtain order without the floor sweep, would I be able to add it later if needed?
Solution
Yes, a floor sweep can be added to the curtain later if needed. We will provide a floor sweep with Velcro sewn at the top, along with loose Velcro that can be attached to the bottom of your curtain.
Application
When it comes to temperature, what are your standard curtains rated for?
Solution
Our vinyl materials can withstand the following temperature ranges:
Opaque vinyl: -20°F to 160°F
Clear vinyl: 0°F to 140°F
Application
Do you have limitations on the sizes that you can build?
Solution
Yes, based on the application where the curtain material will depend on. Our raw materials are available in specific roll sizes, but we can create any size that you may need by customizing it either connection by stitches or Velcro.
Application
Do you have solutions for areas with obstruction above the enclosure such as overhead cranes?
Solution
Yes, there are specialized industrial curtain solutions for areas with overhead obstructions such as cranes, beams, or pipes. These systems are designed to provide flexibility and maintain the functionality of the enclosure without interfering with existing structures.
We have 3 most common solutions to address these.
1. Using Steel Cable. Tension Cables are widely available in local hardware stores. This heavy duty mount can easily carry the weight of the curtain, while letting it retract through its grommets with S-hooks. This is the simplest way of avoiding the obstruction at top, by mounting the cable from pole to pole or wall to wall.
2. Freestanding Hardware. We can provide tracks that are supported by uprights with a maximum height of 12'. These columns are spaced every 8' to 10' depending on the curtain material.
3. SB-5000 and SB-9000 Retractable Screen Models. These two may use various materials and allow openings be enclosed by letting the curtain retract from a roller that is mounted on a post or a wall.
Application
Can I field cut the curtain if there are pipes and other obstructions that has to pass through it?
Solution
Yes, you can field cut industrial curtains to accommodate pipes, ducts, or other obstructions. However, it's essential to follow proper steps to ensure the curtain remains durable and functional after modifications.
1. Mark the Cutting Area:
Use a marker or chalk to outline the area that needs to be cut. Measure carefully to ensure accuracy and avoid cutting more than necessary.
2. Cut the Curtain:
Use a sharp utility knife or heavy-duty scissors to make clean cuts. Cut slowly to prevent tearing or jagged edges.
3. Reinforce the Cut Edges:
To prevent fraying or weakening of the material, apply reinforcement tape such as the one that can be purchased from tear-aid.com (make sure to get Type B). If you anticipate cutting the curtains onsite, you can also include patch tapes on your order. Field cutting allows you to adapt the curtain for custom installations without compromising its effectiveness, provided it’s done carefully. This is a common practice in this industry. Vinyl curtains are tightly reinforced and even if cut is made, they will not fray.
Application
Do you provide repair services for accidental damage to the curtains?
Solution
Yes, we offer repair services or repair kits for curtains damaged by accidents. In connection to this, if you received the curtains with manufacturer defects, it is covered under warranty. See this page for more details, including the ones for outdoor applications which have slightly different terms.
Application
Do you sell curtains outside US?
Solution
Yes, we're offering customizable solutions and can accommodate orders from outside the U.S. Below are the terms that we have for shipments outside contiguous US territories.
- The order can only ship to a location in the Contiguous United States, such as a freight exporter.
- The order cannot be picked up at our warehouse, as the carrier would hold us liable for unpaid freight charges or fees.
- Some orders ship from multiple warehouses. Please inquire with AKON.
- AKON will not provide any paperwork for international shipments; the order will only have a packing slip.
- The order must be paid in advance using ACH or a wire transfer in USD funds.
- There is no warranty on the product, even if AKON is at fault.
- International shipping costs for any further shipments will be covered by the customer.
Application
Can I customize curtain colors by adding windows only for viewing, but the rest are not transparent?
Solution
Yes, you can customize industrial curtains to include transparent viewing windows while keeping the rest of the curtain opaque. This option is commonly available for applications requiring visibility into enclosed areas without compromising privacy, containment, or light blocking.
Combination includes, but not limited to: opaque material (13oz, 18oz, 22oz) and clear material (20mil, 40 mil); opaque material and tinted material.
It is important to note that clear curtains/windows do not provide UV protection from welding sparks. Also, clear curtains cannot be seamed together with tinted curtains.
These applications are displayed on these pages: welding walls and canvas walls.
