Curtain Features

• NFPA fire retardant, CFM fire retardant
• Finished edges for clean crisp appearance
• Grommets every 12" located at the top of the curtain

12oz – Canvas Duck – Olive Green & Blue

• Industrial Grade Canvas
• Blocks most UV radiation
• Weight: 12 oz./sq. yd
• Thickness: 0.025″
• Temp Rating: 350°F
• Color: Olive green
• Meets CPAI-84 section 6, CFM
• Certified Flame Retardant
• Grommeted on top side 12″ apart
• Flame, water, and mildew resistant
• Also available in multiple standard sizes, custom, and rolls
• Water-repellent and mildew-resistant (Pyrosnuff treatment)
• Great resistance to adverse environments

Width

• Measure the distance that you are trying to cover and then add 5% to that dimension and enter it into the width box.
• TIP - You want to add that 5% for the proper drape of the curtain to properly cover the span.

Height

• Measure the distance from the floor to the above mounting point (from where you would attach the curtain track) and subtract 3 inches, and then input it into the height box.
• TIP - If you are not using any hardware, then you don't need to subtract the 3"

Need More Help? Watch This

Common Questions

• Standard curtains have approximately 3.75 to 1″ of a gap from the bottom of the track to the top of the curtain.

What are the dimensions of the track?

• Yes, the track is made to be field cut on site using a hack saw or sawzall.

• The track is modular in design and will arrive in pieces that have a simple bolt together design.

• The track should be supported approximately every 5' with a track support. The farther apart the track supports, the greater the deflection. If you have a relatively light weight curtain then you could space the supports out to about 8' apart. You will receive enough track supports with your order to achieve this 5' spacing.

• Yes. This is called a flush mount install and is very common. Simply drill through the middle of the track and use a small wood screw, bolt, Tek screw...ect into your structure. Space the holes about every 3-5'.

• It is very easy. All of the components simply fit into each other and connect with set screws. The installation is very intuitive. If you have any difficulty simply call or email us and we will walk you through the process.

• The track is Hot-dip galvanizing (HDG) which is often used to protect steel from corrosion in some of the harshest environments imaginable, yet it provides maintenance-free longevity for decades. The corrosion resistance of hot-dip galvanizing varies according to its surroundings but generally corrodes at a rate of 1/30 of bare steel in the same environment.

Key Benefits

• Less expensive than rigid walls
• Can be taken down quickly when not needed
• Can be re-purused in other areas
• Ability to purchase more curtains and attach to existing curtains
• Divide welding cells quickly
• Canvas welding curtains improve worker safety
• Canvas is hot works approved
• Quick to roll out of way when not in use
• Contain air migration, odors, dust and weld slag
• Lifetime warranty on all hardware and 5 year warranty on curtains

Many Layout Options

AKON can supply just about any canvas welding curtain layout you can think of. Below are some common styles. They can be single sided, double-sided, triple sided, four-sided or multiple straights to create complete enclosures. You simply inform AKON about your desired design and we will have it fabricated exactly as you need it. For customized layouts, sketch your design and upload it using our online RFQ form. See button below.